Pickings were really strong last week, besides what I got down at
Kutztown, so here is some of the fresh stuff...
PayPal is preferred (if you use it) on all items. It's easier for me to
ship items off of a paid PayPal invoice, especially First Class ones.
Checks and money orders are still welcome.
And remember........da more ya buy, the cheaper they fly!
First contact (that is e-mail, or phone) that says I want it gets it.
Prices do not include shipping. All items are shipped with Delivery
Confirmation. Insurance, unless it is a big order or a very fragile item
is optional. Just let me know. Also, I am shipping a lot more stuff via
First Class mail. There will be a small amount added to the shipping
cover the cost of the padded mailer. I don't get them for free.
Please put your name and address in the message. Saves time and email
traffic!
------------------------------------------------------
Cantelo 1891 Patent Folding Handle 8 Inch Draw Knife. Measuring 15 3/4"
overall, the blade is 8 1/16" long, 1 3/8" wide at the center, 1 5/16"
at the ends, and this weighs 1 lb 11 oz unboxed. John S. Cantelo of
Boston, MA was granted Pat. No. 454,848 on June 30, 1891 for the design
of this tool. This is in reasonably good condition and was cleaned.
The back of the blade is clean save for some light scuffs, stains, and a
couple of small spots of light pitting up at the top. The edge is
sharp. The front also has some staining, but nothing too bad patina
wise. The handle joints do have some light patina and wear to the
plating. The handles have some dings and stains, but have most of the
original finish, plus a coat of wax. The ferrules and end caps also have
some patina. Not perfect, but still a good working and collectible
tool. $65.00
http://oldetoolshop.com/forsale/april/drawknife0404a.jpg
http://oldetoolshop.com/forsale/april/drawknife0404b.jpg
http://oldetoolshop.com/forsale/april/drawknife0404c.jpg
http://oldetoolshop.com/forsale/april/drawknife0404d.jpg
Vintage Small Solid Brass Drafting Protractor. Measuring 3 3/8" long,
2 1/4" high at the center, and this weighs 1/2 oz unboxed. Not signed as
to the maker. This is in reasonably good condition and was not
cleaned. The front is good save for the large user initials stamped on
the bottom. The edges are good and all the rulings are readable. The
back has some light scuffs and wear. This ain't pristine, but it will
get the job done. $16.00
http://oldetoolshop.com/forsale/april/draftingtool0401a.jpg
http://oldetoolshop.com/forsale/april/draftingtool0401b.jpg
http://oldetoolshop.com/forsale/april/draftingtool0401c.jpg
Brown & Sharpe No 752 Toolmakers Vise. The body is 3 1/4" long, 7/8"
wide, 1 1/8" high, and this weighs 10 oz unboxed. This is in good
condition and was cleaned. There are some small stained spots on the
sides and top of the body. The jaw faces are good and the screw travels
the full distance. The ends have some light scuffs and the base has
some staining and a few light spots of frosting. This ain't minty, but
it is a quality tool that will get the job done. $40.00
http://oldetoolshop.com/forsale/april/machinisttool0411a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0411d.jpg
Small Vintage Perfect Handle Screwdriver. Measuring 3 15/16" long, the
tip is 3/16" wide, and this weighs 1 oz unboxed. This is just marked
Germany which is where most of these small ones were made. This is in
good condition and was cleaned. The blade has a little staining and
frosting, but the tip is good and was never messed with. The shaft and
frame are also good. The handle scales have some staining, but both are
solid and are on tight. I gotta say, as these guys usually go, this one
is a nice example of this tool. $20.00
http://oldetoolshop.com/forsale/april/phsd0401a.jpg
http://oldetoolshop.com/forsale/april/phsd0401b.jpg
http://oldetoolshop.com/forsale/april/phsd0401c.jpg
P S Stubs No 14 Jewelers Pliers. Measuring 4 5/16" long, the jaws are
5/8" deep, 5/32" wide at the tips, and this weighs 1 1/4 oz unboxed.
This is in reasonably good condition and was cleaned. There is a little
frosting and staining, but nothing too bad. The jaws are good save for
a little wear on the tips and they close up tight and flush. The
"through the center" style joint has a wee bit of wiggle to it. This
ain't perfect, but it is a top quality tool that will get the job done.
$17.00
http://oldetoolshop.com/forsale/april/pliers0401a.jpg
http://oldetoolshop.com/forsale/april/pliers0401b.jpg
http://oldetoolshop.com/forsale/april/pliers0401c.jpg
TWO L S Starrett No 470 Framing Square Stair Fixture Guides. They weigh
2 oz unboxed. These are in reasonably good condition and were cleaned.
The bodies have some dots of light patina and there is a little funky on
the inside of the grooves. Both screws are good to go. These are handy
and top quality tools to have around. $22.00
http://oldetoolshop.com/forsale/april/squareguides0401a.jpg
http://oldetoolshop.com/forsale/april/squareguides0401b.jpg
http://oldetoolshop.com/forsale/april/squareguides0401c.jpg
Hand Forged Early Eel Or Frog Gig. Measuring 15 5/8" overall, the head
is 4 1/16" long, 2 1/16" wide across the outside of the tips, and this
weighs 8 1/2 oz unboxed. Not signed as to the maker. This is in
reasonably good condition and was cleaned. There is some overall light
patina. The head is good, and the hand cut barbs on the insides of the
outer tines are sharp. This will need a handle, but that's an easy
fix. I gotta say, that these guys are sure few and far between of
late. $30.00
http://oldetoolshop.com/forsale/april/hfeelgig0401a.jpg
http://oldetoolshop.com/forsale/april/hfeelgig0401b.jpg
http://oldetoolshop.com/forsale/april/hfeelgig0401c.jpg
http://oldetoolshop.com/forsale/april/hfeelgig0401d.jpg
Early Hand Forged Candle Wick Trimmer. Measuring 7 1/16" long and this
weighs 2 1/4 oz unboxed. Not signed as to the maker. My guess is that
this is either late 18th or early 19Th Century as to the age. This is
in reasonably good condition and was not cleaned. There is some overall
light patina, including some scuffs left over from when this was made.
The joint is fairly good. I gotta say, that these guys sure are getting
few and very far between. $32.00
http://oldetoolshop.com/forsale/april/earlycandlewicktrimmer0401a.jpg
http://oldetoolshop.com/forsale/april/earlycandlewicktrimmer0401b.jpg
http://oldetoolshop.com/forsale/april/earlycandlewicktrimmer0401c.jpg
http://oldetoolshop.com/forsale/april/earlycandlewicktrimmer0401d.jpg
http://oldetoolshop.com/forsale/april/earlycandlewicktrimmer0401e.jpg
http://oldetoolshop.com/forsale/april/earlycandlewicktrimmer0401f.jpg
Hand Forged Early Bark Barking Spud Head. Measuring 16" long, the head
is 1 7/8" wide, and this weighs 1 lb 11 oz unboxed. Not signed as to
the maker. This is in reasonably good condition and was cleaned. There
is some overall light pitting and patina, but it ain't like bark removal
is an indoor spot. The head is good and has a bit of steel at the end.
The socket was repairing at some point in time and that is good to go.
This ain't minty, but it's a solid tool that will get the job done. $35.00
http://oldetoolshop.com/forsale/april/hfbarkspud0401a.jpg
http://oldetoolshop.com/forsale/april/hfbarkspud0401b.jpg
http://oldetoolshop.com/forsale/april/hfbarkspud0401c.jpg
http://oldetoolshop.com/forsale/april/hfbarkspud0401d.jpg
http://oldetoolshop.com/forsale/april/hfbarkspud0401e.jpg
Goodell-Pratt No 514 4 Inch Machinist Divider. Measuring 4 13/16" long
(from the tips to the top of the spring) and this weighs 1 1/2 oz
unboxed. This is in reasonably good condition and was cleaned. There is
a little frosting on the legs. The joint is good other than a little
crusty on the inside and the tips are quite pointy (yeah I found that
out the hard way!) The nut travels the full distance and was oiled.
This ain't minty, but it will get the job done. $17.00
http://oldetoolshop.com/forsale/april/machinisttool0409a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0409b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0409c.jpg
RARE Miller & Son Phila Hand Forged Oyster Clam Shucker Shucking Knife.
Measuring 8 1/16" long and this weighs 11 oz unboxed. From what I can
find, Miller & Son made these kind of tools at 309 S. 5th street in
Philadelphia during the 1850's. That address now is an ACME
Supermarket. This is in reasonably good condition and was cleaned.
There is the usual patina found on these kind of items. The blade has
some frosting, but the edges are good. The handle also has some light
patina. I've sold a bunch of these guys over the years and this is the
first one with this mark to come my way. $48.00
http://oldetoolshop.com/forsale/april/clamknife0402a.jpg
http://oldetoolshop.com/forsale/april/clamknife0402b.jpg
http://oldetoolshop.com/forsale/april/clamknife0402c.jpg
Moore & Wright Sheffield 4 Inch Machinist Try Square. Measuring 3
15/16" overall in length, the blade is 3 3/16" long, 2 5/8" high, and
this weighs 3 1/2 oz unboxed. This is in good condition and was
cleaned. The blade has some light scuffs and a little frosting, but
nothing too bad. The handle also has some frosting and a user mark on
the back side. All of the edges and corners are crispy good. This ain't
minty, but it is a quality tool that will get the job done. $24.00
http://oldetoolshop.com/forsale/april/machinisttool0410a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0410d.jpg
L S Starrett No 85 B 9 Inch Extension Divider & Caliper. This all
weighs 13 1/4 oz unboxed. This is in good condition and was cleaned.
The head is good other than a little frosting. The joint is good. All
the nuts work and were oiled and the clamps for the legs are solid with
no cracks. The divider tips are nice and pointy. The caliper legs have
some frosting and a user name stamped on the one side. This ain't
pristine, but it will get the job done. $95.00
http://oldetoolshop.com/forsale/april/machinisttool0408a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0408b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0408c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0408d.jpg
Uncommon Starrett No 61 Reliable Try Square. The blade is 4" long and
this weighs 2 3/4 oz unboxed. This is in reasonably good condition and
was cleaned. The blade has some light scuffs and some frosting on the
front and some very light rust etching and a small user mark on the
back. The edges and corners are good. The handle finish is original,
but is worn a little. The machined faces have some frosting, a couple
of dings, and scuffs, but nothing too bad. The locking nut works and was
oiled. This ain't pristine, but this is not a very common Starrett tool
to say the least, and a new one will cost close to twice what I'm asking
for this one. $85.00
http://oldetoolshop.com/forsale/april/machinisttool0406a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0406b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0406c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0406d.jpg
http://oldetoolshop.com/forsale/april/machinisttool0406e.jpg
Vintage Forged Ships Carpenters Adze Head. Measuring 10 5/16" long, the
edge is 5 7/16" wide, the steel bit looks to be about 5/8" deep, and
this weighs 2 lbs 15 1/2 oz unboxed. Not signed as to the maker. This
is in fair condition and was cleaned. There is some overall pitting and
patina. The steel bit has some pitting as well, and it's bent downward
a little one the one side. The hammer poll has some mushrooming and
wear. The eye has some crusty on the inside and I did scuff the bottom
a little removing a busted old handle, but it is solid. This ain't
pretty or perfect, but these guys sure ain't getting any easier to come
by. $28.00
http://oldetoolshop.com/forsale/april/adze0401a.jpg
http://oldetoolshop.com/forsale/april/adze0401b.jpg
http://oldetoolshop.com/forsale/april/adze0401c.jpg
http://oldetoolshop.com/forsale/april/adze0401d.jpg
http://oldetoolshop.com/forsale/april/adze0401e.jpg
Unusual Hand Forged Blacksmith Top Swage Head. Measuring 5 5/8" long,
the face are is 3 1/16" wide (across the outside), 1 11/16" thick, 2
1/4" on the inside, 1 1/4" deep, and this weighs 2 lbs 10 1/2 oz
unboxed. Not signed as to the maker. What this is for, I ain't gotta
clue, and my local expert don't either. Do not make this a guessing
game, PM me with any thoughts. This is in decent condition and was
cleaned. There is some overall light patina. The face has some dings
and a little mushrooming on the outside of the one edge. The striking
end has some checks and the start of some flaking in the center. The
eye is solid with no checks, but it wasn't the world's greatest punch
job either. This ain't perfect, but it ain't like another one will be
showing up any time soon. $27.00
http://oldetoolshop.com/forsale/april/blacksmith0401a.jpg
http://oldetoolshop.com/forsale/april/blacksmith0401b.jpg
http://oldetoolshop.com/forsale/april/blacksmith0401c.jpg
http://oldetoolshop.com/forsale/april/blacksmith0401d.jpg
James Swan Coopers Bung Auger. Measuring 13 3/4" long, the cut is 2" in
diameter, and this weighs 1 lb 11 1/2 oz unboxed. This is in reasonably
good condition and was cleaned. There is some overall frosting on the
head. The lead screw and cutters are good. The rulings are readable on
side of the auger. The cutting edge is fairly good. The handle is
good, save for a few tiny dots of paint, and has almost all of the
original finish. The screw doesn't remove. This ain't pristine, but
these guys are sure getting few and far between these days. $40.00
http://oldetoolshop.com/forsale/april/cooperstool0401a.jpg
http://oldetoolshop.com/forsale/april/cooperstool0401b.jpg
http://oldetoolshop.com/forsale/april/cooperstool0401c.jpg
http://oldetoolshop.com/forsale/april/cooperstool0401d.jpg
Owasgo Tool No 217 5/8 Inch Side Bead Molding Plane. This weighs 15 1/2
oz unboxed. Owasco Tool Co was a brand name used by the Auburn Tool
Co. This is in good condition and was cleaned. The body has a few
stains, a E scratched on the back, and a couple of very thin checks on
the toe and heel. The sole and boxing are good and the mouth is factory
tight. The wedge is also good. The iron has a few dots of light
patina, but it's clean for the most part. This ain't pristine, but it's
a solid tool that will get the job done. $20.00
http://oldetoolshop.com/forsale/april/woodenplane0406a.jpg
http://oldetoolshop.com/forsale/april/woodenplane0406b.jpg
http://oldetoolshop.com/forsale/april/woodenplane0406c.jpg
http://oldetoolshop.com/forsale/april/woodenplane0406d.jpg
Greenlee 10 Inch Folding Handle Draw Knife Or Drawknife. Measuring 18
1/2" overall, 15 3/4" with the handles closed, the blade is 10 3/16"
long, 1 7/16" wide across the edge, and this weighs 1 lb 10 oz unboxed.
This is in reasonably good condition and was cleaned. The back is clean
save for some small spots of very light pitting. The top has some light
dings. The edge is good. The front also has some frosting and light
pitting. The handles have some wear to the finish and a little
staining, but they are solid. The nuts work and hold. This ain't
minty, but it's a quality tool that will get the job done. $65.00
http://oldetoolshop.com/forsale/april/drawknife0403a.jpg
http://oldetoolshop.com/forsale/april/drawknife0403b.jpg
http://oldetoolshop.com/forsale/april/drawknife0403c.jpg
http://oldetoolshop.com/forsale/april/drawknife0403d.jpg
SEVEN G I Mix No 1 EX Paring Bevel Side Chisels. There is a 3/4",
measuring 8 13/16" from the edge to the end of the socket, the blade is
6 1/8" long, a 7/8", measuring 9 3/16" from the edge to the end of the
socket, the blade is 6 1/8" long, a 1", measuring 9 1/16" from the edge
to the end of the socket, the blade is 6 1/8" long, a 1 1/4", measuring
9 1/2" from the edge to the end of the socket, the blade is 6" long, a 1
1/2", measuring 10 1/8" from the edge to the end of the socket, the
blade is 6 3/16" long, a 1 3/4", measuring 10 1/8" from the edge to the
end of the socket, the blade is 6 1/4" long, a 2", measuring 10 1/8"
from the edge to the end of the socket, the blade is 6 1/4" long, and
they weigh 4 lbs 5 oz unboxed. These are in reasonably good condition
and were cleaned. The backs have a few spots of very light pitting,
along with some staining and frosting, but overall nothing too bad. The
tops have more of the same. The edges are fairly good, but will need a
little work. I did take off a little sharp mushrooming off of a couple
of the sockets, and the one is a little funky on the inside where
somebody else got aggressive removing an old handle, but they are good.
These will need handles, I've tried to get a nice matching set together
with no luck. These ain't pristine, but they sure ain't bad, and sets
like this are getting few and very far between of late. The price
includes US Priority Mail Shipping with insurance and signature
confirmation. $375.00
http://oldetoolshop.com/forsale/april/chiselset0401a.jpg
http://oldetoolshop.com/forsale/april/chiselset0401b.jpg
http://oldetoolshop.com/forsale/april/chiselset0401c.jpg
http://oldetoolshop.com/forsale/april/chiselset0401d.jpg
http://oldetoolshop.com/forsale/april/chiselset0401e.jpg
http://oldetoolshop.com/forsale/april/chiselset0401f.jpg
Kinex DIN 875/0 4 Inch Machinist Square. Measuring 5 1/8" overall in
length, the blade is 4 1/16" long, 3 3/32" high, and this weighs 8 oz
unboxed. This is in very good condition and was not cleaned. There are
some light scuffs and a few dots of light patina, but nothing too bad.
The edges and corners are crispy good. This is a quality tool and
priced cheaper than what a new one will run you. $30.00
http://oldetoolshop.com/forsale/april/machinisttool0405a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0405b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0405c.jpg
Unusual Long Wood Model Makers Clamp. The body is 15 7/8" overall, the
clamping area is 13 1/2" long, the throat is 1/2", the holes for the
movable jaw are spaced at 7/8", and this weighs 3 1/2 oz unboxed. Not
signed as to the maker. This is in reasonably good condition and was
cleaned. There are some light dings and stains, but nothing too bad.
The screw travels the full distance. All the holes are clear. This is
a neat clamp for doing light work to say the least. $24.00
http://oldetoolshop.com/forsale/april/clamp0402a.jpg
http://oldetoolshop.com/forsale/april/clamp0402b.jpg
http://oldetoolshop.com/forsale/april/clamp0402c.jpg
Stanley No 18 6 Inch 1908 Patent Eureka Bevel Square. This weighs 6 oz
unboxed. Christian Bodmer of New Britain, CT was granted Pat. No.
893,223 on July 14, 1908 for the design of this tool. This is in decent
condition and was cleaned. There are some spots on the handle where the
plating is gone, but most of it is present. The blade has some stained
spots, but the edges and corners are good. Both screws work and were
oiled, but the blade does stick a little coming in and out of the body.
This ain't minty, but it will get the job done. $24.00
http://oldetoolshop.com/forsale/april/square0401a.jpg
http://oldetoolshop.com/forsale/april/square0401b.jpg
http://oldetoolshop.com/forsale/april/square0401c.jpg
http://oldetoolshop.com/forsale/april/square0401d.jpg
T H Witherby 7/16 Inch Socket Bench Gouge. Measuring 8 1/16" from the
edge to the end of the socket, the blade is 5 5/8" long, 7/16" wide
across the outside of the sweep, this is 12 5/8" overall, and this
weighs 4 1/2 oz unboxed. The mark is partial and faint. This is in
reasonably good condition and was cleaned. The back of the sweep is
good save for a little staining as is the inside. The edge is sharp.
The socket is good and was never hit. The handle has some stains and 3
small user notches on the side, but it's good to go. This is a top
quality tool that will get the job done. $24.00
http://oldetoolshop.com/forsale/april/chisel0402a.jpg
http://oldetoolshop.com/forsale/april/chisel0402b.jpg
http://oldetoolshop.com/forsale/april/chisel0402c.jpg
Lufkin Rule No 513 Micrometer Depth Gage With Orig Box. This all weighs
1 lb unboxed. John A. Schleicher of Saginaw, MI was granted Pat. No.
1,424,383 on Aug. 1, 1922 and Pat. No. 1,568,295 on Jan. 5, 1926 for the
design of this tool. This is in good condition and was not cleaned.
The head is clean save for some very light scratches on the face and
some light scuffs on the back. The micrometer turns smoothly and the
cap nut for the rods works. This has 3 rods total (one in the tool and
2 in the box). They have a little wear on the sides, but nothing too
bad. This also has the wrench. The oak box has some dings and light
stains, but it's solid, and the late works. This ain't pristine, but it
will get the job done. $45.00
http://oldetoolshop.com/forsale/april/machinisttool0403a.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403b.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403c.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403d.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403e.jpg
http://oldetoolshop.com/forsale/april/machinisttool0403f.jpg
One PAIR Hields Nottingham No 12 Skew Hollow & Round Molding Planes.
The cut is 3/4" (straight across), and they weigh 1 lb 6 3/4 oz
unboxed. William Hields was a Nottingham England plane maker who worked
from 1830 until 1885. The irons are bedded at York pitch and are
skewed. These are in reasonably good condition and were cleaned. The
bodies have some light dings and stains. The soles are good, although
there are some light dings along the side edges of the hollow. Both
mouths are good. Both of the irons have some small spots of pitting,
but are clean for the most part. The edges will need a touch up. Both
wedges have some dings. These ain't pristine, but they will get the job
done. $45.00
http://oldetoolshop.com/forsale/april/woodenplane0402a.jpg
http://oldetoolshop.com/forsale/april/woodenplane0402b.jpg
http://oldetoolshop.com/forsale/april/woodenplane0402c.jpg
http://oldetoolshop.com/forsale/april/woodenplane0402d.jpg
http://oldetoolshop.com/forsale/april/woodenplane0402e.jpg
http://oldetoolshop.com/forsale/april/woodenplane0402f.jpg
Sears By Greenlee 10 Inch Draw Knife Or Drawknife. Measuring 15 1/2"
overall, the blade is 10" long, 1 7/16" wide across the edge, and this
weighs 1 lb 4 oz unboxed. This is in reasonably good condition and was
cleaned. The back is clean save for one very small and light patch of
pitting. There is a larger spot of light pitting on the front. The
edge is good and the top was never hit. The handles have some dings and
stains, but have all of the original finish. The ferrules and end caps
have some light patina. This ain't minty, but it's a quality tool that
will get the job done. $45.00
http://oldetoolshop.com/forsale/april/drawknife0401a.jpg
http://oldetoolshop.com/forsale/april/drawknife0401b.jpg
http://oldetoolshop.com/forsale/april/drawknife0401c.jpg
Vintage Tinsmith Panel Or Paneling Hammer. Measuring 11 1/4" overall,
the head is 4 1/4" long, the face is a little under 3/4" square, the
peen is 3/4" wide, and this weighs 10 1/2 oz unboxed. Not signed as to
the maker. This is in decent condition and was cleaned. There are some
spots of light pitting and some overall frosting on the head, along with
user initials on the one side. The face has some tiny dings, but
nothing too bad. The peen is good. The handle has a check under the eye
from the wedge and some stains, but it's solid. This ain't perfect, but
it will get the job done. $18.00
http://oldetoolshop.com/forsale/mar/hammer0304a.jpg
http://oldetoolshop.com/forsale/mar/hammer0304b.jpg
http://oldetoolshop.com/forsale/mar/hammer0304c.jpg
http://oldetoolshop.com/forsale/mar/hammer0304d.jpg
Essex Mfg Co 5/8 Inch Bevel Side Paring Chisel. Measuring 8 13/16" from
the edge to the end of the socket, the blade is 6 1/8" long, this is 12
9/16" overall, and this weighs 6 1/4 oz unboxed. This is in reasonably
good condition and was cleaned. The back is good save for some light
scuffs and a little frosting. The top has some stained spots, but
nothing too bad. The edge has some chipping and will need a touch up.
The socket is good. The handle is a good replacement and is good other
than a little staining on the one side. This ain't pristine, but it's a
solid tool that will get the job done. $20.00
http://oldetoolshop.com/forsale/mar/chisel0305a.jpg
http://oldetoolshop.com/forsale/mar/chisel0305b.jpg
http://oldetoolshop.com/forsale/mar/chisel0305c.jpg
Vintage 6 Inch Wing Compass Or Divider. Measuring 6 3/16" long and this
weighs 4 1/4 oz unboxed. Not signed as to the maker, other than the
Made In USA mark. This is a probably a Wm Johnson. This is in
reasonably good condition and was cleaned. There is some frosting and a
few small spots of light pitting. The joint and tips are good. The
locking screw and fine adjuster nut both work and were oiled. This
ain't pristine, but it will get the job done. $17.00
http://oldetoolshop.com/forsale/mar/divider0301a.jpg
http://oldetoolshop.com/forsale/mar/divider0301b.jpg
http://oldetoolshop.com/forsale/mar/divider0301c.jpg
Springfield Trapdoor Model 1879 Gun Tool. Measuring 2 5/8" long and
this weighs 1 1/4 oz unboxed. This is in reasonably good condition, the
only cleaning was a wipe down with some penetrating oil to get rid of
some grease. There is a little overall light patina and some oil
residue. The joint is good and hold except for one small area. The
wrench, punch, and screwdriver tips are all good to go. This ain't
minty, but it will get the job done. $17.00
http://oldetoolshop.com/forsale/mar/guntool0302a.jpg
http://oldetoolshop.com/forsale/mar/guntool0302b.jpg
http://oldetoolshop.com/forsale/mar/guntool0302c.jpg
L & I J White 11/16 Inch Bench Gouge. Measuring 5 7/8" from the edge to
the top of the handle, the blade is 4 3/8" long, 11/16" wide across the
inside of the sweep, 13/16" across the outside, this is 11 1/12"
overall, and this weighs 5 1/2 oz unboxed. L. & I. J. White were
Buffalo NY toolmakers who were in business from 1837 until 1928. This
is in reasonably good condition and was cleaned. The inside of the sweep
is clean other than a light patch of pitting around the center. The
back has some stained spots, but nothing too bad. The edge is wicked
good. The London pattern handle looks to be apple wood. That has some
dings, stains, and a couple of small chips, but it's solid. This ain't
pristine, but it's a quality tool that will get the job done. $27.00
http://oldetoolshop.com/forsale/mar/chisel0302a.jpg
http://oldetoolshop.com/forsale/mar/chisel0302b.jpg
http://oldetoolshop.com/forsale/mar/chisel0302c.jpg
Early Rosewood & Brass 2 ft Folding Rule. The body is 12 3/8" long and
this weighs 1 3/4 oz unboxed. Not signed as to the maker, but this
could be 18th or early 19th Century as to the age. This is in good
condition and was cleaned at some point, but not by me. The body has
some light stains and is missing a few of the tiny brass pins, but
nearly all of them are present. There are also hand stamped numerals as
well. NOW, an inch on this guy is actually 15/16", but that has varied
a lot over the years. There is a very slight outward bow to both
sections looking from the slot. The brass rule is good save for some
wear to the corners. The joint is fairly good, but does get a little
loose with the brass straight out. I gotta say that rules like this are
few and very far between. $160.00
http://oldetoolshop.com/forsale/mar/earlyrule0301a.jpg
http://oldetoolshop.com/forsale/mar/earlyrule0301b.jpg
http://oldetoolshop.com/forsale/mar/earlyrule0301c.jpg
http://oldetoolshop.com/forsale/mar/earlyrule0301d.jpg
Maples & Sons Cast Steel No 5 11/16" Carving Tool Gouge. Measuring 5"
from the edge to the top of where the handle would start, the blade is
11/16" wide across the sweep, the sweep looks to be a No. 5, this is 7
1/4" overall, and this weighs 2 oz unboxed. This is in fair condition
and was cleaned. Somebody else had polished the sweep a little at the
edge, but after that there is some overall light pitting on the inside.
The back is fairly clean for the most part. The tang is good. This
will need a handle. This ain't perfect, but with a little work, it will
get the job done. $14.00
http://oldetoolshop.com/forsale/mar/carvingtool0301a.jpg
http://oldetoolshop.com/forsale/mar/carvingtool0301b.jpg
http://oldetoolshop.com/forsale/mar/carvingtool0301c.jpg
Vintage Cobblers Hammer. Measuring 7 3/4" overall, the head is 3 5/8"
long, the face is 1 5/16" in diameter, the peen is 1 3/8" wide, and this
weighs 14 3/4 oz unboxed. Not signed as to the maker. This is in decent
condition and was cleaned. There is some overall roughness on the head
left over from when this was made. The black finish is original and
most of that is present. The face has some tiny dings, but nothing too
bad. The peen is good. The handle was user crafted and was hand carved
from a piece of oak. That has some checks at the end and some long gone
worm holes, but it's solid enough to use. This ain't pristine, but it
will get the job done. $17.00
http://oldetoolshop.com/forsale/mar/hammer0303a.jpg
http://oldetoolshop.com/forsale/mar/hammer0303b.jpg
http://oldetoolshop.com/forsale/mar/hammer0303c.jpg
http://oldetoolshop.com/forsale/mar/hammer0303d.jpg
Neat Small Cast Iron Novelty Ball Peen Hammer. Measuring 5 1/16"
overall, the head is 2 1/4" long, the face and peen are 7/16" in
diameter, and this weighs 4 3/4 oz unboxed. Not signed as to the
maker. This is in reasonably good condition and was not cleaned. There
are a few dots and small spots of patina, but this has almost all of the
original finish. The pictures tell the rest of the story. This is what
it is, but to my eye it is kinda neat. $14.00
http://oldetoolshop.com/forsale/mar/hammer0302a.jpg
http://oldetoolshop.com/forsale/mar/hammer0302b.jpg
http://oldetoolshop.com/forsale/mar/hammer0302c.jpg
http://oldetoolshop.com/forsale/mar/hammer0302d.jpg
Norton A500 IV Sharpening Stone. Measuring 7 1/2" long, 1 1/8" wide,
3/8" high, and this weighs 3 3/4 oz unboxed. The grit feels like a
fine. This is in good condition and was cleaned. There is some
staining on both sides, but nothing much in the way of wear. There are
some tiny dings on the sides. This ain't minty, but it is a quality
stone that will get the job done. $14.00
http://oldetoolshop.com/forsale/mar/sharpeningstone0301a.jpg
http://oldetoolshop.com/forsale/mar/sharpeningstone0301b.jpg
http://oldetoolshop.com/forsale/mar/sharpeningstone0301c.jpg
L S Starrett No 73 6 Inch Yankee Pattern Inside Caliper. Measuring 7"
long and this weighs 2 3/4 oz unboxed. This is in decent condition and
was cleaned. There is some light frosting on the legs and some light
pitting down by the tips. The spring and tips are good otherwise. The
nut travels the full distance and holds. This ain't pristine, but it
will get the job done. $16.00
http://oldetoolshop.com/forsale/mar/machinisttool0302a.jpg
http://oldetoolshop.com/forsale/mar/machinisttool0302b.jpg
http://oldetoolshop.com/forsale/mar/machinisttool0302c.jpg
Millers Falls No 3 Rogers Patent Timberframer T-Auger Handle. Measuring
16" long and this weighs 1 lb 4 1/4 oz unboxed. George E. Rogers of
Greenfield, MA was granted Pat. No. 484,050 on Oct. 11, 1892 for the
design of this tool. This isn't signed, but few of these were. This is
in reasonably good condition and was cleaned and the head refinished.
The jaws are good. The nut works and the threads were oiled. The oak
handles have some stains and dings, a few of them deep, but they are
solid and on tight. This ain't pristine, but it's a solid tool that
will get the job done. $45.00
http://oldetoolshop.com/forsale/mar/augerhandle0301a.jpg
http://oldetoolshop.com/forsale/mar/augerhandle0301b.jpg
http://oldetoolshop.com/forsale/mar/augerhandle0301c.jpg
http://oldetoolshop.com/forsale/mar/augerhandle0301d.jpg
Pexto Sampson-D No 8012D 12 Inch Sweep Brace. This weighs 3 lbs 5 1/4
oz unboxed. Henry V. Smith of Hartford, CT was granted Pat. No. 542,448
on July 9, 1895 for the original design of the chuck used on this tool.
This is in decent condition and was cleaned. The plating on the arms
and chuck is pretty much gone and there is some overall light frosting,
but nothing too bad patina wise. The Sampson chuck, which takes both
round shaft and square tang bits is good. The ratchet works in both
directions and the locked position. The grip and pad look to be
rosewood. They both have some dings, but spin freely. This ain't
pristine, but it's a solid and heavy duty tool that will get the job
done. $45.00
http://oldetoolshop.com/forsale/mar/brace0302a.jpg
http://oldetoolshop.com/forsale/mar/brace0302b.jpg
http://oldetoolshop.com/forsale/mar/brace0302c.jpg
http://oldetoolshop.com/forsale/mar/brace0302d.jpg
Stanley Handyman No H1253A 10 Inch Sweep Brace. This weighs 1 lb 15 1/4
oz unboxed. This is in reasonably good condition and was not cleaned.
There is some staining and a few spots of light patina on the frame, but
nothing too bad. The chuck and jaws are good, but this model never had
a spring on the jaws. The ratchet works in both directions and the
locked position. The wood grip and pad have almost all of the original
finish. There are a few dings and bits of paint, but both spin freely.
This ain't pristine, but it will get the job done. $24.00
http://oldetoolshop.com/forsale/mar/brace0301a.jpg
http://oldetoolshop.com/forsale/mar/brace0301b.jpg
http://oldetoolshop.com/forsale/mar/brace0301c.jpg
http://oldetoolshop.com/forsale/mar/brace0301d.jpg
-------------------------------------
"It had long since come to my attention that people of accomplishment
rarely sat back and let things happen to them. They went out and
happened to things."
Leonardo da Vinci -
Tony
Olde River Hard Goods
http://www.oldetoolshop.com
TSMusic on Facebook
http://www.facebook.com/tonyseomusic
|
