Hello Galoots!=C2=A0I've been a sitting under this porch for about two
years now and thought this would be a good time to come up and stretch a
bit and introduce myself.=C2=A0 my name is Alan Chevalier,=C2=A0 I grew
up in Southern Indiana and spent the last 30 years in the USAF, retired
in 08.=C2=A0 Right now am still working for Uncle Sam and still overseas
for a little while longer. I've always been interested in woodworking
and tools for as far back as I can remember. I come from a long line of
carpenters/wood butchers that provided me plenty of opportunities to
learn a few tricks.=C2=A0 I eventually figured out I was basically a
long for the grunt work but I enjoyed it none the less. The military is
great at moving the family and furnishings around the world but as you
all know, shop equipment and tools are heavy.=C2=A0 I tried hard to
convince the ole err uh, SWMBO that it makes great living room
furniture, she didn=E2=80=99t buy it. So about 10/15 yrs ago I decided
hand tools were the way to go. With the exception of a cordless
Craftsman drill, I now consider myself a 100% hand tool
woodworker.=C2=A0 Although, there have been a few times where my brace
and bit has saved the day when the 18V batteries couldn=E2=80=99t keep
up.=C2=A0 I=E2=80=99ve built several projects using only hand tools
including a chest to house my arsenal of user tools and a treadle lathe
to ah, well, just because. I have learned a lot listening to your
discussions on the porch but I still have a lot to learn and hope to
pick your brains from time to time for a little guidance and mentorship
in galootish endeavors. =C2=A0 I live in asia, so my available shop
space is pretty small, 13=E2=80=99x3=E2=80=99. It=E2=80=99s actually a
glassed in balcony on the 15th floor.=C2=A0 Between me the bench and the
wall, there isn=E2=80=99t much room to maneuver. To get a full stroke on
a 14=E2=80=9D back saw I have to open the sliding glass window for
clearance. Yes, I=E2=80=99ve had a few close calls, SWMBO was real
impressed last summer at how I managed to knock a 4=E2=80=9D hole in the
screen and didn=E2=80=99t loose anything in the process. =C2=A0 I have a
question for you saw gurus. I have Keen Kutter rip saw, apple wood
handle, nib and chromed screws.=C2=A0 The medallion clearly says Keen
Kutter but instead of the normal =E2=80=9Cwedge=E2=80=9D logo, it has
what appears to be an ax head.=C2=A0 I have looked on line for info but
come up empty.=C2=A0 Does anyone know anything about this KK logo?
=C2=A0 Also, regarding a post by mike Roetzel a few days ago looking for
information about New York Saw Works.=C2=A0 Sorry Mike, I know nothing
about the company.=C2=A0 But the picture really caught my attention. I
apologize to all if this is out of line, but I=E2=80=99m just curious to
know which state you found this saw in.=C2=A0 The reason I ask is
because I have several tools that belonged to my Great Grandfather, a
carpenter in Kentucky and southern Indian (1890s-1930s) and he marked
his saws and planes with his initial, a large M carved in the handle,
identical in style and fashion as the one on your saw.=C2=A0 Obviously
we=E2=80=99ll never know if your saw once belonged to my ancestor but
what are the odds that two galoots would have used the same
mark?=C2=A0=C2=A0 Cheers! Alan



------------------------------------------------------------------------

Welcome aboard, Cliff! New blood is what we always need.

I am curious. Where are you in Asia?

On Mar 28, 2011, at 3:12 AM, clifford Chevalier wrote:

> Hello Galoots! I've been a sitting under this porch for about two
> years now and thought this would be a good time to come up and stretch
> a bit and introduce myself. my name is Alan Chevalier, I grew up in
> Southern Indiana and spent the last 30 years in the USAF, retired in
> 08. Right now am still working for Uncle Sam and still overseas for a
> little while longer. I've always been interested in woodworking and
> tools for as far back as I can remember. I come from a long line of
> carpenters/wood butchers that provided me plenty of opportunities to
> learn a few tricks. I eventually figured out I was basically a long
> for the grunt work but I enjoyed it none the less.>> The military is
> great at moving the family and furnishings around the world but as you
> all know, shop equipment and tools are heavy. I tried hard to convince
> the ole err uh, SWMBO that it makes great living room furniture, she
> didn=92t buy it. So about 10/15 yrs ago I decided hand tools were the
> way to go. With the exception of a cordless Craftsman drill, I now
> consider myself a 100% hand tool woodworker. Although, there have been
> a few times where my brace and bit has saved the day when the 18V
> batteries couldn=92t keep up. I=92ve built several projects using only
> hand tools including a chest to house my arsenal of user tools and a
> treadle lathe to ah, well, just because. I have learned a lot
> listening to your discussions on the porch but I still have a lot to
> learn and hope to pick your brains from time to time for a little
> guidance and mentorship in galootish endeavors.
> > I live in asia, so my available shop space is pretty small,
> > 13=92x3=92. It=92s actually a glassed in balcony on the 15th floor.
> > Between me the bench and the wall, there isn=92t much room to
> > maneuver. To get a full stroke on a 14=94 back saw I have to open
> > the sliding glass window for clearance. Yes, I=92ve had a few close
> > calls, SWMBO was real impressed last summer at how I managed to
> > knock a 4=94 hole in the screen and didn=92t loose anything in the
> > process. I have a question for you saw gurus. I have Keen Kutter rip
> > saw, apple wood handle, nib and chromed screws. The medallion
> > clearly says Keen Kutter but instead of the normal =93wedge=94 logo,
> > it has what appears to be an ax head. I have looked on line for info
> > but come up empty. Does anyone know anything about this KK logo?
> > Also, regarding a post by mike Roetzel a few days ago looking for
> > information about New York Saw Works. Sorry Mike, I know nothing
> > about the company. But the picture really caught my attention. I
> > apologize to all if this is out of line, but I=92m just curious to
> > know which state you found this saw in. The reason I ask is because
> > I have several tools that belonged to my Great Grandfather, a
> > carpenter in Kentucky and southern Indian (1890s-1930s) and he
> > marked his saws and planes with his initial, a large M carved in the
> > handle, identical in style and fashion as the one on your saw.
> > Obviously we=92ll never know if your saw once belonged to my
> > ancestor but what are the odds that two galoots would have used the
> > same mark? > > Cheers! Alan

------------------------------------------------------------------------

Welcome to the light! With the hole in the screen (on his 'porch') he is 
probably at 3 1/2 feet.
Mike

On 03/28/2011 07:24 AM, Ed Minch wrote:
>
> On Mar 28, 2011, at 6:12 AM, clifford Chevalier wrote:
>
>> To get a full stroke on a 14” back saw I have to open the sliding 
>> glass window for clearance.
>
> Do we have a contender for the smallest shop?  At least the shop with 
> the smallest dimension at 3'
>
> Welcome aboard Alan.
>
> Ed Minch
>
>
>
>
>
> ------------------------------------------------------------------------
> OldTools is a mailing list catering to the interests of hand tool
> aficionados, both collectors and users, to discuss the history, usage,
> value, location, availability, collectibility, and restoration of
> traditional handtools, especially woodworking tools.
>
> To change your subscription options:
> http://ruckus.law.cornell.edu/mailman/listinfo/oldtools
>
> To read the FAQ:
> http://swingleydev.com/archive/faq.html
>
> OldTools archive: http://swingleydev.com/archive/
>
> OldTools@r...
> http://ruckus.law.cornell.edu/mailman/listinfo/oldtools
------------------------------------------------------------------------

On Mar 28, 2011, at 6:12 AM, clifford Chevalier wrote:

> To get a full stroke on a 14=94 back saw I have to open the sliding
> =20 glass window for clearance.

Do we have a contender for the smallest shop? At least the shop with =20
the smallest dimension at 3'

Welcome aboard Alan.

Ed Minch

------------------------------------------------------------------------