At 12:31 PM 8/11/04, Rick Levenson wrote:
>Aha, I have been struggling with a question for a while, and now Lee's
>pictures have spurred me on to asking.
>
> > http://home.comcast.net/~leeleader/Fx_4_Sq_2.jpg
> > http://home.comcast.net/~leeleader/Fx_4_Sq_3.jpg
> > http://home.comcast.net/~leeleader/Fx_4_Sq_5.jpg
>
>
>I have a set of a 4-square and a 6 inch square very similar to the one in
>the picture that Lee posted, but marked with:
>
>   Challenge Cutlery Corp
>   Patented 1904
>   Bridgeport, Conn

Those in the picture are a fixed arm version of the Hall's Patent

http://oldetoolshop.com/toolpics/sq1.jpg

I have had a couple of the ones with the pivoting arm, but never one with 
the level

Tony

                         Olde River Hard Goods
                             350 West Catawissa Street
                               Nesquehoning PA 18240
                                         570-669-9421
               The best old tool store in Pennsylvania!
                     http://www.oldetoolshop.com