OldTools Archive

Recent Bios FAQ

278541 Kirk Eppler 2024‑06‑18 Re: [Sender Not Verified] Re: Purchased this saw
Here is confirmation of what you did being correct, per the US Dept of


Kirk in Half Moon Bay, CA, who also has their axe sharpening manual

On Tue, Jun 18, 2024 at 11:44 AM Richard Wilson <
yorkshireman@y...> wrote:

> The Great American though, presents 3 working teeth to the cut at a time,
> and I scratched my head a good bit before deciding that I would treat each
> pair of 3 point teeth as a set - so, the two outer teeth are rakers - as
> above, and each inner point is sharpened alternately left or right.  A bit
> over the top if crosscutting, but given that a raker is kind go trying to
> be a rip tooth, effective for ripping.

Kirk Eppler in Half Moon Bay, CA 

Recent Bios FAQ