I use a long bolt, with a plastic piece angled on the end. Combination
alignment and clamp when a wingnut is added.
On Sat, Aug 18, 2018 at 7:39 AM, Claudio DeLorenzi
wrote:
> Get some 5/16” brass tubing. Use it as an internal
> splint to align the broken parts.
>
>
> On Sat, Aug 18, 2018 at 10:10 AM wmy2@f... <
> wmy2@f...>
> wrote:
>
> >...I have struggled aligning the halves of cracked
> > plane totes to glue them. I.... It involves using a No. 2 Phillips
> screwdriver,
> > shimmed with a piece of soda can. Thescrewdriver is a loose fit.
> Cutting a
> > triangle shaped piece of the soda can, with the tip trimmed off, I can
> use
> > it as a shimto tighten the screwdriver to a snug fit, and the two halves
> > will align easily.
> >
--
Kirk Eppler in HMB, CA
|